Delta Electronics — 9.2.2 Dimensions and Profile

AS Series Module Manual 9.2.2 Dimensions and Profile Unit: mm 9-4 1 SCM PO WER ER RO R 2 CA RD 1 CA RD 2 ID 1 .3 3 88 98 FOR M AT 1 4 ID 2 F OR MA T 2 5 C OM . RTU 6 56 88 98 .3 CA RD 1 CA RD 2 ID 1 M AT 1 88 ID 2 MA T 2 RTU 56 7 75 7 8 9 10 Number Name Description 1 Model Name Model name of the module Operating status of the module RUN LED Indicator (blue) ON: the module is running. OFF: the module has low voltage or no power. Error status of the module ON: there is a hardware error. ERROR LED Indicator (red) OFF: the module is operating normally. 2 Blink: an error has occurred or occurs on the module; refer to section 9.7 for more information. Function card 1 Indicator Blink:

data is being transmitted to function card 1. (orange) OFF: there is no data transmission to function card 1. Function card 2 Indicator Blink: data is being transmitted to function card 2. (orange) OFF: there is no data transmission to function card 2. Knob for the Node ID and 3 2 sets, one for function card 1 and the other for function card 2 Format Function Card 1 Slot COM Mode: for AS-F232, AS-F422, AS-F485 4 COM Mode: for AS-F232, AS-F422, AS-F485, AS-FCOPM Function Card 2 Slot RTU Mode: for AS-FCOPM, AS-FEN02, AS-FPFN02 COM Mode: serial communication extension mode 5 Knob for the Work Mode RTU Mode:

remote module mode 6 DIN Rail Clip Secures the module onto the DIN rail 7 Module Connecting Set Connects the modules 8 Ground Clip 9 Label Nameplate 10 RTU Power Input Supplies power to the RTU module for RTU Mode only 9 _