Chapter 9 Serial Communication Module AS00SCM 9.3.2.1 TX Packets and RX Packets You can create several TX and RX packets in a group. A packet includes messages, an address, a length, and a checksum. Packet Name : enter the packet name. Packet View : shows the packet contents. Packet Segment Edit : adjust the sequence of segments and add or delete segments. No. : the segment number. You can create no more than 64 segments. Class : the segment class. The available classes are Message, Address, Length, and Checksum. Format : the data format of the segment. The available data formats are Hex (hexadecimal), ASCII, and Code. Segment View : the contents of the segment Message :
a message may be either Constant or Variable. Messages can be applied to a header segment, a start bit segment, an end bit segment, and a data segment. There can be several messages in a packet. Address : an address may be either Constant or Variable. There can be only one address segment in a packet. Length : enter the length of a packet. There can be only one length segment in a packet. Class: 1 byte or 2 byes 9_ Format: select a format for the length, Hex or ASCII Value: enter a value for the length according to the format; unit: byte Checksum : edit the checksum. There can be only one checksum segment in a packet. Class : select a Class. Format : select the Format for the checksum.
Initial value : set the initial value for the checksum. 9-11