AS Series Module Manual Reverse : the high byte of a one-word checksum is calculated, and the high byte (word) and low byte (byte) of the checksum are reversed. Constant : enter a constant. Format : Select Hex , ASCII , or Code in the Format box. If you select Code , the data is a control code. Value : enter a constant . Variable : a variable data to read or write. Specify either an internal register in AH10SCM-A or a register in a CPU module. Format : select the format for the data. Null : data is not processed. Hex : ASCII data is converted into hexadecimal data. ASCII data that cannot be converted into hexadecimal data is converted into 0. ASCII :
Hexadecimal data is converted into ASCII data. Hexadecimal data that cannot be converted into ASCII _9 data is converted into 0. Reverse : the high byte of a one-word checksum which is calculated, and the low byte of the checksum are reversed. Variable Property : Function : for a TX packet, select Read R() for the Function . For an RX packet, select Read R() , Write W() , or * for the Function . Mapping Register : select a register in the PLC. 9-12