Delta Electronics — 11.5.3.1.1. Connecting AS01DNET-A (in RTU Mode) and Extension Module on DIN Rail

Chapter 11 DeviceNet Master Scanner Module AS01DNET-A 11.5.3 Installation 11.5.3.1. Installing AS01DNET (in RTU Mode) 11.5.3.1.1. Connecting AS01DNET-A (in RTU Mode) and Extension Module on DIN Rail 11  Please push the clips of AS01DNET-A (RTU) in the directions indicated by arrow ① until hearing a click. That means the DIN clips are interlocked each other. Then insert the module hooks at the bottom into the DIN rail mounting slot until hearing a click. That means AS01DNET-A (RTU) is connected to the DIN rail.  To install the second module AS16AP11T, push the clips of AS16AP11T in the direction indicated by arrow ① .

Then aim the left-side slot of AS16AP11T at the right-side slot of AS01DNET-A (RTU) and push AS16AP11T in the direction as illustrated by arrow ② until hearing a click. That means the module is on the DIN rail and is connected to AS01DNET-A (RTU). In the same way, install more IO modules on the right side of AS01DNET-A (RTU) and DIN rail one by one. 1 DIN rail clip 2  Tighten the screws on the top of the module at the end of installing. 11-53 01D NET MS NS IN IN x101 0 1 Node Addres x100 RTU Mas ter/ Slave 1 DIN rail clip