Delta Electronics — 11.5.4.2.1. Making a connection between DeviceNet Builder and PLC

AS Series Module Manual 11.5.4.2. Introduction of Software 11 Before the new version of DeviceNet Builder software is used for making a connection with PLC, make sure that the communication manager COMMGR has been installed. (Refer to ISPSoft user manual for details on COMMGR usage.) 11.5.4.2.1. Making a connection between DeviceNet Builder and PLC Before making a normal connection between DeviceNet Builder and PLC, you have to do relevant setup for COMMGR software. 1. Build a driver through the COMMGR software. Refer to Section 2.4 Communication Setting in the ISPSoft User Manual for more details. 2. Call DeviceNet Builder via ISPSoft Refer to Section 11.6 for details on how to operate. 3.

The called DeviceNet Builder is started as below. 11-56 No. Name Unit Description of analog I/O modules and temperature modules are determined by the default mapping parameter length and user-added parameter length together, no more than 20 words.