Chapter 13 IO-Link Communication Module AS04SIL According to the description on CANopen DS301 Mode in section 13.4.1, connect the AS00SCM-A module to AS CPU in AS special remote mode, configure all extension modules and IO-Link devices in HWCONFIG 4.0 and then switch the mode back to the CANopen DS301 mode. If the upper device is an AH series CPU, the CANopen Builder software can be opened. Configure the PDO mapping list according to the EDS file of the AS00SCM-A module. See the details in section 13.4.5. If the upper device is a master PLC from other brand, use the software from the brand to configure the CANopen slaves and PDO mapping.
13.4.3 Application of AS Special Remote Mode See the following table of devices used in the application example: 13 First of all, open the HWCONFIG 4.0 software and import the IODD files of IO-Link devices which can be downloaded from tool. vendors’ official websites. Follow the steps here to import the IODD files through the Device Description File Manager 13-19 Model name Device type AS332T-A PLC AS00SCM-A RTU AS04SIL-A IO-Link Master AI-B100 3rd IO-Link Device E3S-DCP21-IL3 3rd IO-Link Device MAXREFDES27# 3rd IO-Link Device MAXREFDES36# 3rd IO-Link Device