Delta Electronics — 14.2.8 LED Indicators

AS Series Module Manual LED Indicators 14 14-20 Indicator Color Name Description PWR Blue Power indicator ON: The power supply is normal. OFF: No power supply ERR Red Error indicator ON: A major error occurs in the module. OFF: The module is operating normally. Blinking: A minor error exists in the module (Blinks every 0.5 seconds.) CH1 Act. Green Ch1 counter state indicator OFF: The counter is disabled. Pulse Input - ON: The counter is enabled but there is no change in the counter value. Blinking: The counter value is changing. (Blinks every 0.5 seconds.) SSI Input - Blinking: The counter is enabled and the position value is being updated.

(Blinks every 0.5 seconds.) CH1 A Red Ch1 phase-A input indicator ON: The phase-A input for channel 1 is active. OFF: The phase-A input for channel 1 is not active. CH1 B Red Ch1 phase-B input indicator ON: The phase-B input for channel 1 is active. OFF: The phase-B input for channel 1 is not active. CH1 Z Red Ch1 phase-Z or DI input indicator ON: The phase-Z input for channel 1 is active. OFF: The phase-Z input for channel 1 is not active. Y0.0 Red Y0.0 output status indicator ON: The Y0.0 output is active. OFF: The Y0.0 output is not active. Y0.1 Red Y0.1 output status indicator ON: The Y0.1 output is active OFF: The Y0.1 output is not active. CH2 Act.

Green Ch2 counter state indicator OFF: The counter is disabled. Pulse Input - ON: The counter is enabled but there is no change in the counter value. Blinking: The counter value is changing. (Blinks every 0.5 seconds.) SSI Input - Blinking: The counter is enabled and the position value is being updated. (Blinks every 0.5 seconds.) CH2 A Red Ch2 phase-A input indicator ON: The phase-A input for channel 2 is active. OFF: The phase-A input for channel 2 is not active. CH2 B Red Ch2 phase-B input indicator ON: The phase-B input for channel 2 is active. OFF: The phase-B input for channel 2 is not active. CH2 Z Red Ch2 phase-Z or DI input indicator ON: The phase-Z input for channel 2 is active.

OFF: The phase-Z input for channel 2 is not active. Y0.2 Red Y0.2 output status indicator ON: The Y0.2 output is active OFF: The Y0.2 output is not active. Y0.3 Red Y0.3 output status indicator ON: The Y0.3 output is active OFF: The Y0.3 output is not active.