Delta Electronics — 4.2.5 Functions

AS Series Module Manual _4 4.2.5 Functions 4-8 CR# Name Description Atr. Defaults 28 range for channel 4 For example, if the scale range for an analog to digital input channel is ±10.0 V, it indicates the maximum value is +10.0 V and the minimum value is -10.0 V. If the scale range for an analog to digital input channel is 4 mA ~ 20 mA. It indicates the maximum value is 20 mA and the minimum value is 4 mA. Note: You can use PLC instruction DSCLP (API0217) and set SM685 to ON to use floating-point operations when a conversion range needs to edit.

R 29 The maximum scale range for channel 1 R 10.0 30 R 31 The maximum scale range for channel 2 R 10.0 32 R 33 The maximum scale range for channel 3 R 10.0 34 R 35 The maximum scale range for channel 4 R 10.0 36 R 37 Channel alarm setup 0: warning 1: alarm bit0: error in the power supply bit1: error in the module hardware bit2: error in calibration R/W 0 Item Function Description 1 Enable/Disable a Channel 1. Enable or disable a channel. 2. If a channel is disabled, the total conversion time decreases. 2 Calibration Calibrate a linear curve. 3 Retain an Output When a module stops running, the system can retain the signal sent by the module.

4 Refresh Time for an Output Refresh the analog output value according to the value of the fixed slope. 5 Scale Range You can set the scale range when the format is floating-point.