Delta Electronics — 6.26.2 Explanation of High-speed Output Instructions

Chapter 6 Applied Instructions Case 1: when the mark alignment occurs in the ramp-up section  Green line: signal of mark aligment  Blue line: the actual output speed The operation of the mark alignment (green line: OFF -> ON) begins when the number of pulses is 3000. The target frequency of 10 kHz cannot be reached even if S 6 is 15,000. Case 2: when the mark alignment occurs in the ramp-up section  Green line: signal of mark aligment  Blue line: the actual output speed The operation of the mark alignment (green line: OFF -> ON) begins when the number of pulses is 6000. The target 6_ frequency of 10 kHz can be reached if S 6 is 15,000. 6-835