Delta Electronics — 6.15.2 Explanation of Module Instructions

AS Series Programming Manual _6 6-446 Operand Data type Function Setting range Description AUTO DBW _ DWORD/DINT Range within which the auto tuning is not working 0~32000 Auto tuning NOT activated when SV is in the range of± dead band width Kc Kp _ REAL Calculated proportional coefficient (Kc or Kp, according to the settings in PID EQ) _ Range of positive single- precision floating- point numbers If the P coefficient is less than 0, the Kc Kp is 0. _ Independently, if Kc Kp is 0, it is _ not controlled by P. Ti Ki _ REAL Integral coefficient (Ti or Ki, according to the settings in PID EQ) _ Range of positive single- precision floating- point numbers (unit:

Ti = sec; Ki = 1/sec) If the calculated coefficient I is less than 0, Ti Ki _ is 0. If Ti Ki is 0, it _ is not controlled by I. Td Kd _ REAL Derivative coefficient (Td or Kd, according to the settings in PID EQ) _ Range of positive single- precision floating- point numbers (unit: sec) If the calculated coefficient D is less than 0, Td Kd is 0. If _ Ti Ki is 0, it is not _ controlled by D.