Chapter 7: BIOS Restore on AC Power Loss This setting allows you to choose how the system will react when power returns after an unexpected loss of power. The options are Power Off and Last State . Watch Dog Timer This setting is used to enable or disabled the Watch Dog Timer function. It must be used in conjunction with the Watch Dog jumper (see Chapter 2). Options are Disabled and Enabled. Advanced Chipset Control NorthBridge Confi guration Memory Confi guration Memclock Mode This setting determines how the memory clock is set. Auto has the memory clock set by the code and Limit allows the user to set a standard value. MCT Timing Mode Sets the timing mode for memory.
Options are Auto and Manual. User Confi guration Mode Options are Auto and Manual. Bank Interleaving This setting is used to determine whether bank interleaving is to be employed. The options are Auto and Disabled. Burst Length Use this setting to set the memory burst length. 64-bit Dq must use 4 beats. Options are 8 beats, 4 beats and 2 beats. Enable Clock to All DIMMs This setting allows the user to enable unused clocks to DIMMs, even if DIMM slots are empty. Options are Enabled and Disabled . 7-7