Super Micro Computer, Inc. 1041M-T2+ — Super Micro 1041M-T2+ User Manual: Comprehensive Guide for System Integrators

AS1041M-T2+ User's Manual Wake-On-Ring The Wake-On-Ring header is desig- nated JWOR. This function allows your computer to receive and "wake-up" by an incoming call to the modem when in suspend state. See the table on the right for pin defi nitions. You must have a Wake-On-Ring card and cable to use this feature. Compact Flash Power Headers A Compact Flash Card Power Connec- tor is located at JWF1. For the Com- pact Flash Card to work properly, you will fi rst need to connect the device's power cable to JWF1 and correctly set the Compact Flash Jumper (JP1).

SGPIO SGPIO1 and SGPIO2 (Serial General Purpose Input/Output) provide a bus between the SATA controller and the SATA drive backplane to provide SATA enclosure management func- tions. Connect the appropriate cables from the backplane to the SGPIO1 and SGPIO2 header(s) to utilize SATA management functions on your system. Note: NC indicates no connection. 5-16 Wake-On-Ring Pin Defi nitions (JWOR) Pin# Defi nition 1 Ground (Black) 2 Wake-up Compact Flash Power Header Pin Defi nitions (JWF1) Pin# Defi nition 1 +5V 2 Ground 3 Signal SGPIO Header Pin Defi nitions (SGPIO1, SGPIO2) Pin# Defi nition Pin # Defi nition 1 NC 2 NC 3 Ground 4 Data 5 Load 6 Ground 7 NC 8 NC