Super Micro Computer, Inc. 1041M-T2+ — Super Micro 1041M-T2+ User Manual: Comprehensive Guide for System Integrators

Chapter 5: Advanced Serverboard Setup JLAN1/2 (Ethernet Ports) Two Gigabit Ethernet ports (desig- nated JLAN1 and JLAN2) are located beside the COM2 port. These Ethernet ports accept RJ45 type cables. ATX PS/2 Keyboard and PS/2 Mouse Ports The ATX PS/2 keyboard and the PS/2 mouse ports are located at J3. The mouse is the top (green) port. See the table on the right for pin defi nitions. Chassis Intrusion A Chassis Intrusion header is located at JL1. Attach the appropriate cable to inform you of a chassis intrusion. Wake-On-LAN The Wake-On-LAN header is desig- nated JWOL. See the table on the right for pin defi nitions.

You must have a LAN card with a Wake-On-LAN con- nector and cable to use the Wake-On- LAN feature. I 2 C Header The JPI 2 C header is for I 2 C, which may be used to monitor the status of the power supply. See the table on the right for pin defi nitions. 5-15 PS/2 Keyboard and Mouse Port Pin Defi nitions (J3) Pin# Defi nition 1 Data 2 NC 3 Ground 4 VCC 5 Clock 6 NC Chassis Intrusion Pin Defi nitions (JL1) Pin# Defi nition 1 Intrusion Input 2 Ground Wake-On-LAN Pin Defi nitions (JWOL) Pin# Defi nition 1 +5V Standby 2 Ground 3 Wake-up I2C Header (JPI2C) Pin Defi nitions Pin# Defi nition 1 Clock 2 SMB Data 3 N/A 4 N/A 5 N/A