Wiring ASDA-B3 3.4 Wiring for the CN2 encoder connector The CN2 encoder signal connector is shown as follows: 3 (1) CN2 connector (female); (2) CN2 connector (male) DO NOT wire Pin 3 and Pin 4 of the servo drive CN2 connector. They are for internal use only; wiring them will cause damage to the internal circuit. When using an absolute encoder, the battery supplies power directly to the encoder, so wiring to the CN2 connector of the servo drive is not required. Quick connector ends: View from this side View from this side 2 4 6 1 3 5 Military connector ends: View from this side View from this side 7 4 2 3 2 4 6 1 10 8 9 1 3 5 3-56