Delta Electronics — 4.3.2 Display the decimal point

Test Operation and Panel Display ASDA-B3 4.3 Status display 4.3.1 Save the setting display 4 When you complete the parameter setting, press the SET key to save the parameters. The panel displays the status for one second. 4.3.2 Display the decimal point 4-6 Displayed symbol Description Correctly saved the setting value (Saved). Read-only and write-protected parameter (Read-only). Entered the wrong password or did not enter a password (Locked). Entered an incorrect setting value or the reserved setting value (Out of Range). You cannot enter a value when in the Servo On state (Servo On). Changes to the parameter take effect after cycling the power to the servo drive (Power On).

Displayed symbol Description Low High byte byte High byte / low byte indication: this indicates the current high byte or low byte when the data is displayed in decimal format (32 bits). Negative No sign function Negative sign: the two decimal points on the left represent the negative sign when the data is displayed in decimal format (16 or 32 bits). In hexadecimal format, it only shows positive values.