ASDA-B3 Test Operation and Panel Display The following table shows the panel display of 16-bit and 32-bit values. 4 The following table shows the panel display for the negative sign. Note: 1. Dec means the value is displayed in decimal format; Hex represents hexadecimal format. 2. The display shown above is applicable in both Monitoring mode and Editing mode. 3. When all monitoring variables are 32 bits, you can switch the high / low bit and the display method (Dec / Hex). As described in Chapter 8, each parameter only supports one display method and cannot be switched.
4-9 Example of the displayed value Description 16 bits 32 bits Example of the displayed value Description Shows negative values. If the value is -12345, it displays as 1.2.345 (only in decimal format; there is no positive or negative sign for hexadecimal format display).