Tuning ASDA-B3 5.2.4 Alarms related to auto tuning In Auto Tuning mode, it is vital that you program the command path, including the operation 5 cycle (such as acceleration, constant speed, and deceleration) and dwell time. See the following figure. When any of the settings is incorrect, the servo drive stops tuning and displays an alarm. Please check the alarm causes and take corrective actions. cycle Speed Operation cycle Operation Max. speed Dwell Time Acc. time AL08A Auto-tuning function - Command error AL08C Auto-tuning function - Inertia estimation error AL08B Auto-tuning function - Pause time is too short 5-14 Display Alarm name