ASDA-B3 Operation Mode 6.2.5 Electronic gear ratio (E-Gear ratio) The electronic gear provides easy settings for the resolution. The resolution of ASDA-B3 is 24-bit, which means that it generates 16,777,216 pulses per motor rotation. Regardless of the 6 encoder resolution (17-bit, 20-bit, or 22-bit), the E-Gear ratio is set according to the 24-bit resolution of ASDA-B3 servo drive. When the E-Gear ratio is 1, it generates 16,777,216 pulses per motor rotation. When you set the ratio to 0.5, then every two pulses from the command (controller) corresponds to one pulse for the motor. However, larger E-Gear ratio might create a sharp corner in the profile and lead to a high jerk.
To solve this problem, apply an S-curve command filter or a low-pass filter to reduce the jerk. For example, if you set the E-Gear ratio so that the workpiece is moved at the speed of 1 μm/pulse, then it means the workpiece moves 1 μm per pulse. (1) Motor; (2) Ball screw pitch: 3 mm (equals 3,000 μ m); WL: workpiece; WT: platform Refer to Chapter 8 for detailed descriptions of the relevant parameters. 6-9 Gear ratio Moving distance per 1 pulse command E-Gear is not applied 1 = 1 μm 3000 rev 1 3000 μm = × = (Unit: ) pulse 1 16777216 pulse 16777216 rev E-Gear is applied 16777216 = 3000 μm 3000 rev 16777216 μm = × = 1 (Unit:
) pulse 3000 pulse 16777216 rev Parameter Function P1.044 E-Gear ratio (numerator) (N1) P1.045 E-Gear ratio (denominator) (M)