Delta Electronics — 6.3.7 Resonance suppression unit

ASDA-B3 Operation Mode 6.3.7 Resonance suppression unit When resonance occurs, it is probably because the stiffness of the control system is too high or the response bandwidth is too great. Eliminating these two factors can improve the situation. 6 In addition, use the low-pass filter (P2.025) and Notch filter (P2.023, P2.024, P2.043 - P2.046, and P2.095 - P2.103) to suppress the resonance if you want the control parameters to remain unchanged. Refer to Chapter 8 for detailed descriptions of the relevant parameters.

Speed control unit Current Low-pass filter P2.025 Current controller sensor PI controller P2.004, P2.006 PWM Motor Notch filter 1 P2.023, P2.024 Notch filter 2 P2.043, P2.044 Notch filter 3 P2.045, P2.046 Notch filter 4 P2.098, P2.099 Notch filter 5 P2.101, P2.102 Encoder Auto resonance suppression switch and detection level setting P2.047, P2.048 Speed estimator 6-23 Parameter Function P2.023 Notch filter frequency (1) P2.024 Notch filter attenuation level (1) P2.043 Notch filter frequency (2) P2.044 Notch filter attenuation level (2) P2.045 Notch filter frequency (3) P2.046 Notch filter attenuation level (3) P2.095 Notch filter bandwidth (1) P2.096 Notch filter bandwidth (2) P2.097 Notch filter bandwidth (3) P2.098 Notch filter frequency (4) P2.099 Notch filter attenuation level (4) P2.100 Notch filter bandwidth (4) P2.101 Notch filter frequency (5) P2.102 Notch filter attenuation level (5) P2.103 Notch filter bandwidth (5) P2.025 Resonance suppression low-pass filter Differentiator Speed feed forward gain P2.007