Delta Electronics — 6.3.6 Gain adjustment of the speed loop

Operation Mode ASDA-B3 Theoretically, a stepping response can be used to explain proportional gain (KVP), integral gain (KVI), and feed forward gain (KVF). Here, the time domain is used to illustrate the basic principle. 6 Time domain The higher the KVP value, the larger the bandwidth. The time of the speed increase will also be shorter. However, if the value is set too high, the phase margin is too small. The effect is not as good as KVI for the steady-state error but is better for the effect on following error. The higher the KVI value, the larger the low-frequency gain. It shortens the time for the steady-state error to reduce to zero.

However, it does not significantly reduce the following error. The closer the KVF value is to 1, the more complete the forward compensation. The following error becomes very small. However, a KVF value that is set too high also causes vibration. 6-22