ASDA-B3 Parameters 8 Settings: This setting is the same as P0.017. Settings: 7 Bit 15 Bit Settings: Y Z U X 8-23 Status monitoring register content selection (for PC Address: 005AH P0.045■ software) 005BH Default: 0 Control mode: All Unit: - Setting range: -300 to 127 Format: DEC Data size: 16-bit Address: 005CH P0.046★■ Servo drive digital output (DO) status 005DH Default: 0x0000 Control mode: All Unit: - Setting range: 0x0000 - 0x00FF Format: HEX Data size:
16-bit 6 5 4 3 2 1 0 14 13 12 11 10 9 8 Bit Function Bit Function 0 SRDY (servo ready) 8 HOME (homing complete) 1 SON (servo activated) 9 OLW (early warning for motor overload) 2 ZSPD (zero speed detection) 10 WARN (This DO is on when servo warning, CW, CCW, EMGS, undervoltage, or communication error occurs.) 3 TSPD (target speed reached) 11 Reserved 4 TPOS (target position reached) 12 Reserved 5 TQL (torque limit activated) 13 Reserved 6 ALRM (servo alarm) 14 Reserved 7 BRKR (magnetic brake control output) 15 Reserved P0.047 - Reserved P0.048 Address: 0062H P0.049■ Update encoder absolute position 0063H Default: 0x0000 Control mode: All Unit: - Setting range: 0x0000 - 0x0002 Format:
HEX Data size: 16-bit