Parameters ASDA-B3 8 Settings: Bit Bit Settings: The first value of resonance width. This function is disabled if P2.024 is 0. P2.023, P2.024, and P2.095 are the first Notch filter parameters. 8-88 P 2.090 - Reserved P2.093 Address: 02BCH P2.094▲ Special bit register 3 02BDH 0x1010 0x0010 (B3-F) PT / PR / S / Sz Default: Control mode: Unit: - Setting range: 0x0000 - 0xF3F6 Format: HEX Data size: 16-bit 7 6 5 4 3 2 1 0 15 14 13 12 11 10 9 8 Bit Function Description Bit 0 - Bit 3 Reserved - Bit 4 Dynamic brake options 0: disable new dynamic brake 1:
enable new dynamic brake and force use the DC Bus voltage to determine the timing of regenerative energy consumption Bit 5 AL016 IGBT overheat alarm switch 0: enable AL016 IGBT overheat alarm 1: disable AL016 IGBT overheat alarm Bit 6 - Bit 7 Reserved - Bit Function Description Bit 8 First set of vibration elimination 0: disable first set of vibration elimination 1: enable first set of vibration elimination (P1.089 - P1.091) Vibration elimination takes effect only when the two-degrees- of-freedom control function (P2.094 [Bit 12]) is enabled. Bit 9 Second set of vibration elimination 0: disable second set of vibration elimination 1:
enable second set of vibration elimination (P1.092 - P1.094) Vibration elimination takes effect only when the two-degrees- of-freedom control function (P2.094 [Bit 12]) is enabled. Bit 10 - Bit 11 Reserved - Bit 12 Two-degrees-of-freedo control function 0: disable two-degrees-of-freedom control function (A2 and B2 models do not have this function.) 1: enable two-degrees-of-freedom control function Bit 13 - Bit 15 Reserved - Address: 02BEH P2.095 Notch filter bandwidth (1) 02BFH Default: 5 Control mode: All Unit: - Setting range: 1 - 10 Format: DEC Data size: 16-bit