Delta Electronics — P5.xxx Motion control parameters

ASDA-B3 Parameters 8 Settings: Refer to P5.020 for the acceleration / deceleration time in PR mode. Settings: Refer to P5.020 for the acceleration / deceleration time in PR mode. Settings: This parameter is for the deceleration time for auto protection, and the default value of this is small (shorter deceleration time). Settings: This parameter is for the deceleration time for auto protection, and the default value of this is small (shorter deceleration time). Settings: The first data Capture obtained is saved at this address in the data array. This parameter is only writable when Capture stops (refer to P5.039). 8-115 Address:

0540H P5.032 Acceleration / deceleration time (Number #12) 0541H Default: 5000 Control mode: PR Unit: ms Setting range: 1 to 65500 Format: DEC Data size: 16-bit Address: 0542H P5.033 Acceleration / deceleration time (Number #13) 0543H Default: 8000 Control mode: PR Unit: ms Setting range: 1 to 65500 Format: DEC Data size: 16-bit Address: 0544H P5.034 Acceleration / deceleration time (Number #14) 0545H Default: 50 Control mode: PR Unit: ms Setting range: 1 to 1500 Format: DEC Data size: 16-bit Address: 0546H P5.035 Acceleration / deceleration time (Number #15) 0547H Default: 30 Control mode: PR Unit: ms Setting range: 1 to 1200 Format: DEC Data size: 16-bit Address:

0548H P5.036 Capture - start address of data array 0549H Default: 0 Control mode: All Unit: - Setting range: 0 to (value set by P5.010 minus 1) Format: DEC Data size: 16-bit