CANopen Mode ASDA-B3 11.2.2.2 Service data object (SDO) With Service data objects (SDOs), you can write or read objects. The SDO message format is 11 mainly composed of COB-ID and SDO data. SDO data can transmit up to 4 bytes. COB-ID Packet (8 bytes in total) Controller Servo drive 600h+ Node-ID Write data with SDO To use an SDO to write data with the controller, you need to write the request code, index, and data according to the SDO format. The servo drive then returns the corresponding message based on the written data. The following figure shows the packet format when the controller sends the SDO for writing data:
COB-ID Controller Servo drive 600 h + Node-ID Packet (8 bytes in total) 11-8 0 1 2 3 4 5 6 7 Byte Function Byte 0 Command code Byte 1 - Byte 2 Object index Byte 3 Object sub-index Byte 4 - Byte 7 Data 0 1 2 3 4 5 6 7 Function Object index Object sub-index Data Description code Byte 0 Byte 1 Byte 2 Byte 3 Byte 4 Byte 5 Byte 6 Byte 7 23h - - - Data Write 4 bytes of data. 2Bh - - - Data Write 2 bytes of data. 2Fh - - - Data Write 1 byte of data.