ASDA-B3 Troubleshooting AL809 PR motion setting error or command decoding error Condition: an error occurs when the servo drive decodes the motion command. Trigger condition Cause: incorrect motion command or abnormal software compiling may cause 12 and cause error in the PR program. 1. If this alarm occurs when the servo is not in the PR mode, save the parameter file and contact the distributor. Checking method and corrective action 2. For advanced users: save the scope screenshot when the alarm occurs. Set P5.007 and P0.001 for the two channels and save the scope. How to clear the alarm? Cycle power on the servo drive. 12-49