Specifications ASDA-B3 A.1 ASDA-B3 series servo drive A.1.1 Specifications of the ASDA-B3 servo drive A A-2 100 W 200 W 400 W 750 W 1 kW 1.5 kW 2 kW 3 kW ASDA-B3 01 02 04 07 10 15 20 30 Power Single- / Three-phase 220 VAC Three-phase 220 VAC Phase / Voltage Single- / Three-phase 200 - 230 VAC, -15% to 10% Three-phase 200 - 230 VAC, -15% to 10% Permissible voltage Input current (3PH) 0.81 1.61 4.32 8.76 9.21 9.72 14.7 16.68 Unit: Arms Input current (1PH) 1.39 2.77 8.28 16.68 17.49 18.72 - - Unit: Arms Continuous output 0.9 1.55 2.65 5.1 7.3 8.3 13.4 19.4 current Unit: Arms Max. instantaneous 3.88 7.07 10.6 16.4 21.21 27 38.3 58.9 output current Unit:
Arms Cooling method Air convection cooling Fan cooling Encoder resolution 24-bit (16777216 p/rev) Main circuit control SVPWM control Control mode Manual / Auto Regenerative resistor N/A Built-in Position control mode Pulse type Pulse + Direction, CCW pulse + CW pulse, A phase + B phase Pulse + Direction: 4 Mpps; CCW pulse + CW pulse: 4 Mpps; A phase + B phase: single-phase 4 Mpps; Open collector: 200 Kpps Max. input pulse frequency Command source External pulse / Register Smoothing method Low-pass, S-curve, and moving filters E-Gear ratio:
N / M times, limited to (1 / 4 E-Gear ratio Torque limit Parameter settings Feed forward Parameter settings compensation Speed control mode Voltage -10 to +10 VDC range Analog Resolution 12-bit command Input 1 M input impedance Time 25 µs constant Speed control range*1 1 : 6000 Command source External analog command / Register Smoothing method Low-pass and S-curve filter