Locator ACEUser's Guide, 3.6.x, 18316-000 Rev A Page 561 Object Definition Frame/Group The frame or group to which the result belongs. Model Index Index of the model located for each instance. Model Name Name of the model located for each instance. Fit Quality Normalized average error between the matched model contours and the actual contours detected in the input image. Fit quality ranges from 0 to 100, with 100 being the best quality. A value of 100 means that the average error is 0. Con- versely, a value of 0 means that the average matched error is equal to Conformity Tolerance. Match Quality Amount of matched model contours for the selec- ted object instance.
Match quality ranges from 0 to 100, with 100 being the best quality. A value of 100 means that 100% of the model contours were successfully matched to the actual contours detected in the input image. Clear Quality Measure of the clear area surrounding the spe- cified object instance. Clear quality ranges from 0 to 100, with 100 being the best quality. A value of 100 means that the instance is completely free of obstacles. If Minimum Clearance is Disabled, this value is 100. Frame/Group Position X X coordinate of the origin of the located instance. Position Y Y coordinate of the origin of the located instance. Angle Angle of the located instance.
Scale Factor Relative size of the located instance, with respect to its associated model. Symmetry Index of the object instance of which the selected object instance is a symmetry. Output Symmetric Instances must be true. Time Time needed to recognize and locate the selected object instance, expressed in milliseconds.