Locator Additional Menus The locator tool uses a custom configuration display to graphically show the models asso- ciated with the tool. You can drag/drop models onto the tool display. The Locator Model editor can be opened by double-clicking on the model in the Models sec- tion. Locator Model Display Window Related Topics Configuring Locator Properties - Advanced Locator Model Configuring Locator Properties - Advanced The Advanced Properties section of the Locator tool interface provides access to advanced Loc- ator parameters and properties. The Locator detects edges in the input images, then uses the edges to generate a vectorized description of the image, called a Scene.
The Locator tool generates source contours on two coarseness levels: Outline and Detail. Edge Detection parameters modify the quality and quantity of contours that are generated from the input image. Contour Detection Contour Detection sets how the contour detection parameters are configured. For most applications, Contour Detection should be set to All Models. Custom contour detection should only be used when the default values do not work correctly. Custom can specify Outline Level, Detail Level, and Tracking Inertia. l When set to All Models, the contour detection parameters are optimized by analyzing the parameters that were used to build all the models that are currently active.
l When set to Custom, the contour detection parameters are set manually to integer values. ACEUser's Guide, 3.6.x, 18316-000 Rev A Page 562