omron — Process Components

Overview Overview The ACE software allows you to build applications, such as ACE PackXpert packaging applications which can be basic pick-and-place cells or complex cells with multiple cameras, conveyors, and robots. You can create and "program" these cells without having to write any programming code. Further, the software optimizes the cell programming to maximize throughput, handle part flow and robot utilization (line balancing), and other cell parameters based on settings that you specify. This is accomplished by dividing the work between the PC and the Adept controller, as follows: Operating on the PC:

l Vision location/camera management l Vision object filtering l Hardware/line configuration and balancing scenarios l Tracking part status as parts are processed by the robots Operating on the controller: l Queue managing instances that have been passed to the controller for processing. This includes noti- fying the PC concerning the status of parts being processed and not processed. l Robot control Operating assumptions: l The grippers for the robot are wired and controlled at a V+ level. They can be defined in the software interface, but the low-level control is associated with the controller belonging to the robot.

For most applications (even complex conveyor-tracking or multi-robot applications), the entire application can be constructed and programmed through the software interface, without writing any program code. For applications that require greater control, you can override the default V+ code and make changes, as needed. Process Components This section describes the Process components, which are accessed from the Process menu. The other application components, such as Adept robots, grippers (end-effectors), controllers, and vision tools, are described in other sections of this documentation. Process Pallets The Process Pallet object is used to define the layout and location of a pallet.

The pallet can be in a static pos- ition or it can be located on a conveyor belt. The pallet can use a traditional row and column part layout or use a radial part layout. Belt and Belt Encoder The Belt object defines a conveyor belt used by the system. The Belt object maintains a list of encoders that are associated with the conveyor. The Belt Encoder defines the mm/count ratio of the encoder. The ACE User's Guide, 3.6.x 18316-000 Rev A Page 800