omron — Process Components

Process Components Belt Encoder Controller Connection maintains a list of controllers that the encoder is wired into. The con- troller connection can also specify controller latching to a particular encoder. The Belt object also contains belt speed and start/stop controls. Parts and Part Targets A Part object defines a part that is input for processing. The Part object has a Configuration drop-down list box that is used to specify, in general terms, how the part is input to the system. A Part Target object defines a possible destination for a part. The possible configurations for a Part Target object are the same as for a Part object.

Depending on the selected configuration, additional information can be defined when configuring the part: The following sections provide details on several of the Part Configuration options: l Part Configuration The Part Configuration defines the part pick or place requirements. Belt - the part is picked from or placed onto a conveyor belt. It may use latching, a camera, or a spa- cing interval to determine the position. A pallet is optional. Static - the part is picked from or placed onto a fixed location. Because it is a fixed location, no cam- era or belt is used. A pallet is optional. Vision - the part pick or place process requires a fixed-location camera. There is no belt used.

A pallet is optional. l Vision Properties Vision Properties are used when the Part Configuration is defined as Vision. A vision tool is specified that is used to locate the part—for example, this could be an inspection tool that filters instances based on some criteria. Additionally, the properties can be configured to filter the vision results based on a part name. This will most likely be associated with a named part returned from a locator model. l Belt Properties Belt Properties are used when the Part Configuration is defined as Belt. A belt and encoder must be specified for use with the product. Then a Belt Mode is defined, which describes how the part is related to the belt.

For this item, additional information is required based on the selection: ACE User's Guide, 3.6.x, 18316-000 Rev A Page 801 Part Configuration Vision Properties Belt Properties Pallet Belt Optional Required Optional Static Not Used Not Used Optional Vision Required Not Used Optional