Sensor Calibrations 3. Click Next to proceed. The Move the Robot to the Idle Position screen opens. Teaching a Vision on the Fly Process (Move the Robot to the Idle Position) 4. Complete the remaining steps of the wizard, as described in Teaching a Process on page 894. Sensor Calibrations This section describes the Sensor Calibrations group in the Process Manager. For details, see Process Man- ager on page 843. The Sensor Calibrations group defines the robot-to-sensor calibrations for the selected workcell process. For more details on defining a workcell process, see Processes . ACE User's Guide, 3.6.x, 18316-000 Rev A Page 909