Sensor Calibrations Sensor Calibrations Group Each of the items in the Sensor Calibrations group is described in the following table: In addition to the items above, a shortcut menu is available, which duplicates the functions provided by the Edit and Calibrate buttons. To display the shortcut menu, right-click on a process in the Processes group. The following menu opens: Sensor Calibrations Group Shortcut Menu ACE User's Guide, 3.6.x 18316-000 Rev A Page 910 Item Description Robot The robot specified for the belt calibration. Double-click this item or click Edit to dis- play the Belt Calibration Editor. For details, see Editing the Calibration Parameters on page 911.
Sensor The sensor specified for the process. Double-click this item or click Edit to display the Belt Calibration Editor. For details, see Editing the Calibration Parameters on page 911. A "sensor" can be any of the following: belt camera l fixed camera (downward-looking camera) l latch sensor l spacing reference l refinement camera (upward-looking camera) l Edit Click to edit the selected belt calibration. For details, see Editing the Calibration Parameters on page 911. Calibrate Click to teach the selected process. For details, see Using the Calibration Wizard on page 914.