omron — Code and Description List

Code and Description List ACE User's Guide, 3.6.x 18316-000 Rev A Page 934 Code Description C R G CV BE L F P PT Pa Cs O It cannot be accessed by robots on different controllers. -20128 The controller associated with the feeder is not defined for source {0}. x x -20127 Custom strategy monitoring program is not defined. x -20126 Custom initialization program is not defined. x -20125 Custom belt program is not defined. x x -20124 Robot queue for belt monitoring has not been defined. x x -20123 The pallet associated with '{0}' does not have any available slots. x -20122 Robot '{1}' end-effector does not have any tips. x -20121 Robot '{1}' does not have a selected end- effector.

x -20120 Unable to execute the vision tool '{0}' x -20119 The belt encoder in '{1}' associated with '{0}' cannot have multiple encoders associated with the spacing part. x x -20118 '{0}' must have one latch signal enabled on a controller associated with the camera. x x x -20117 The encoder referenced by '{0}' is not con- figured to latch to the latching controller in the belt '{1}'. x x x -20116 The encoder referenced by '{0}' is not wired into the robot controller '{2}' in the belt '{1}'. x x x -20115 The encoder referenced by '{0}' is not wired into the robot controller in the belt '{1}'. x x x -20114 '{0}' does not identify a Belt encoder.

x -20113 Robot '{1}' is not associated with a controller. x x -20112 '{0}' has not been calibrated to the spacing ref- erence for belt '{1}'. x