AutoVISION Quick Start Guide December 2020 4. Capture an Image Adjust the camera and lighting settings to produce the best image. a. Select the Image view on Navigator bar to adjust your image for best performance. Creating a New Job will move you automatically to Image view. b. Capture images by clicking on the blue camera icon. If you have hardware connected, you will also have live image icon. Additional Information Using the Emulator Section 5.1 describes how to load “saved images” into AutoVISION. c. The camera and lighting settings are available on the right side. These settings include [Exposure], [Gain], [Focus] and [Lighting] Modes.
Additional Information About Exposure, Gain, Focus adjustment Click the Auto Calibration icon for optimal camera parameters to be set automatically. This feature works best if there are high contrast features in the center of the image. After Auto Calibration has completed, click the blue camera icon to capture a new full screen image with these settings. a b c