AutoVISION Quick Start Guide December 2020 5. Edit Vision Job Select the Edit view on Navigator bar to add or adjust the VISION Tools used in your job. 5.1 Set Camera Parameters Adjust camera parameters, including the camera trigger. Load saved images if using an Emulator. a. To the left of the image is the tool list with the Camera at the top. Select the Camera in the tool list. The selected tool will turn light blue. i. To use saved images, click the camera icon on the left side of the Camera tool. This will change the icon to a folder and a dialog box will be displayed allowing your choose the folder that contains the saved images. ii.
Clicking on the Folder will toggle back to taking images from the connected hardware. Additional Information The images for this AutoVISION quick tutorial are located at: C:\Omron\AutoVision\TestImages\AV Quick Start b. To the right of the image are the settings associated with the selected tool. Set the desired trigger settings. In this example, leave this setting at [none] or [Virtual] for this job.