Atari Games Badlands Universal Kit — Atari Badlands Universal Kit Installation Instructions Manual PDF

Badlands Universal Kit Installation Use a 5/16" Drill Bit, 10 places NOTE Use the template at the end of the chapter to install the pedals. [* 15" ot 43/8" —| Figure 1-2 Installing the Pedals on the Game decal on the control panel. Do not put the decal CAUTION over the black cover plate. 8. Tighten the nuts on the steering assembly studs to 40 inch-pounds maximum. If you tighten the nuts too much, you can dam- Now install the black cover plate on the control panel with the carriage bolts, flat washers, and lock nuts. 9. age the assembly. Install each steering assembly with a mounting plate on the underside of the control panel. Install the mounting plate so the steering assembly cannot 11.

Install the buttons with a plastic “Start/Fire” collar under each button. Put the blue buttons on the left be torn off the control panel. and red buttons on the right. 10. Put the 1/4-20 lock nuts and flat washers on the studs. Do not use a ratchet or an air gun to tighten the nuts. CAUTION Install the steering mounting plates under the control panel so the Black Metal Cover ; steering assemblies cannot be torn Steering Assy Mounting Plate (2 places) off the control panel. .

Steering Carriage Wheel Assy (2 places) (6 places) Steering Assy Mounting Holes (6 places) Control Panel Decai Steering Assy Mounting Hoies (6 places) Harness Hoies (2 places) Biue Button Assy Snap-Action Switch Start/Fire Collar (2 places) Locknut (6 places) ' Red Blue Button Holes Red Button Holes NOTE Button Assy (2 places) (2 places) The steering wheels are rotated for clarity Snap-Action Switch StarvFire Cotter Detail; of Black Metal Cover Figure 1-3 Assembling the Control Panel