Test CAN system (TSC1-FM message) Flash code: 2x long, 13x short Fault indication: Fault is indicated by the EDC indicator lamp coming on continuously Fault path: EDC – CAN communication is faulty Effect of fault: Idle speed Possible cause: Power interruption Test precondition: EDC control unit and CAN computer disconnected Socket box connected to EDC plug 47 Test Measurement Corrective measures Resistance Resistance measurement between pin 30 (CAN-L) on the socket box and a down- stream computer Setpoint: 0 Ω – Check line – Check plug connection Resistance measurement between pin 31 (CAN-H) on the socket box and a down- stream computer Setpoint: 0 Ω