MAN Nutzfahrzeuge Aktiengesellschaft — Plug connections

Plug connections 56 Pin No. Abbreviation Description 30 CAN-L Controller Area Network – Interfaces 31 CAN-H Controller Area Network – Interfaces 32 NBF 1 Needle movement sensor – Input, dynamic – UPP approx. 2 V 33 LDF 2 Boost pressure sensor – Output, supply – Controlled direct voltage, U approx.

5 V 34 KTF 1 Fuel temperature sensor (used for turbo air temperature) – Input, analog 35 MDB 1 Multi-stage input (torque limitation) – Input, analog – Input by change in resistance 36 LDF 1 Boost pressure sensor signal – Input, analog 37 FGB 1 Not used 38 EOL E Not used 39 LGS-E Idle speed switch signal – Input, static – against GND-O (terminal 13) 40 MST-E External engine cut-out 41 ZDR-E2 Intermediate engine speed control 2 – Input, static Batt.+ 42 MBR-E Not used 43 BRE-E Not used 44 FGR 1 Speed control device 45 PWG 2 Pedal travel sensor – Output, supply – Controlled direct voltage, U approx. 5 V 46 HRL O Main relay – Output (switch) – Imax 0.3 A, batt.

– against batt.+ 47 K15-E Terminal 15, digit. Data for control unit – Input, static – Batt. + 48 ISO-K ISO-K link to ISO protocol – Interfaces 49 ISO-L ISO-L link to ISO protocol – Interfaces 50 TKS-E Door contact switch – Input, static – Batt. + 51 FGG 1 Driving speed sensor signal – Input, dynamic – Square-wave voltage UPP 8.5 V, f. variable 52 PB1-E Pulse-width modulated input signal 1 – Interface 53 WTF 1 Coolant temperature sensor – Input, analog 54 HGB 1 Multi-stage input, maximum speed limitation – Input, analog – Input by change in resistance 55 LTF 1 Not used