Operation 3.2 Explanation of components 3. Transmission shift mode selector switch This switch (3) is used to change the shift point when the AUTO SHIFT/MANUAL selector switch has been switched to auto shift. At each of the L, H positions, the system switches to auto shift and the auto shift pilot lamp on the machine monitor lights up. Normally, set to auto shift. MANUAL position: System is set to manual shift and speed range is a position selected by gearshift lever GK038023 L position: Travel speed when shifting up is low (flat ground, normal travel) H position:
Travel speed when shifting up is high (traveling uphill, traveling at high speed) If it is set to the L position when the work is mainly operations on flat ground, it is possible to shift up when the engine speed is low. This is effective in reducing fuel consumption. For details of the manual shift, see "Manual shift (3-58)". For details of the auto-shift, see "Automatic shift (3-59)". WA380-6H – VEAM440100 3-43