Komatsu — 3.2.2 Switches

3.2 Explanation of components Operation 4. Transmission cut-off switch b mission cut-off switch to the OFF position, depress the accelera- tor pedal while keeping the left brake pedal depressed, then gradually release the brake pedal and allow the machine to move. In this way the machine can be prevented from traveling backwards. a GK038024 Press this switch (4) to turn on and off the transmission cut-off system. When the switch is pressed, the pilot lamp lights up and the sys- tem is turned ON. The transmission is shifted to neutral at the adjusted brake pedal depression position. Normally, keep the switch at the ON position.

For details of the method of adjusting the cut-off position, see "Adjusting transmission cut-off position (3-116)". Position (a): OFF The left brake pedal acts in the same way as the normal brake (right brake pedal). Position (b): ON The left brake pedal acts in the same way as the normal brake, and at the same time, sets the transmission to neutral. The brake pedal position where the cut-off system is actuated can be adjusted by using the transmission cut-off set switch on the right switch panel. 5. Transmission cut-off set switch a position. Turn this switch (5) ON to adjust the brake pedal position where the transmission is automatically shifted to Neutral. GK038025 Position (a):

ON Cut-off position can be adjusted When the switch is released, it automatically returns to its origi- nal position. For details of the method of adjusting the cut-off position, see "Adjusting transmission cut-off position (3-116)" 3-44 WA380-6H – VEAM440100 WARNING WARNING CAUTION CAUTION