Operation 3.2 Explanation of components 6. Lamp switch This switch (6) is used to light up the front lamps, side clearance lamps, tail lamps, and instrument panel. Position (a): OFF a b c Position (b): Side clearance lamps, tail lamps, and instrument panel light up Position (c): Head lamps light up in addition to lamps at (b) position GK043122 REMARK The lamp switch can be operated regardless of the position of the lever. 6. Turn signal lever This switch (6) is used to operate the turn signal lamp. Position (a): LEFT TURN (Push lever FORWARD.) Position (b): OFF Position (c): RIGHT TURN (Pull lever BACK.) a c b REMARK When the lever is operated, the turn signal pilot lamp also flashes.
When the steering wheel is turned back, the lever automatically returns to its original position. If it does not return, return it man- ually. GK043123 6. Dimmer switch This switch (6) is used to switch the head lamps between high beam and low beam. When the head lamps are at high beam, the high beam pilot lamp lights up. Position (a): Low beam b a Position (b): High beam GK043124 WA380-6H – VEAM440100 3-45