Komatsu — 3.2.2 Switches

Operation 3.2 Explanation of components REMARK When the direction of rotation of the fan is switched, the reverse rotation pilot lamp flashes. When the machine is operating under high load or in low tem- peratures, the direction of rotation of the fan may not change. This is to protect the machine. When the engine is stopped, the fan returns to normal rotation. When the switch is set to position (b) (Manual reverse rotation switch ON), if the switch is released, it returns to position (c) (Neutral).

Even if the switch is not kept pressed at position (b), the fan will continue to rotate in reverse direction for a certain period, so there is no need to keep the switch pressed at posi- tion (b). 24. Directional selector switch This switch (24) is used to switch the direction of travel of the machine between forward and reverse. F Position: FORWARD N Position: Neutral R Position: REVERSE Before operating this switch, check that the condition is as fol- lows. GK043139 ! Directional lever is at N ! Directional selector switch actuation switch is at ON If the condition is not as above, the switch will not work. For details, see "Changingdirection (3-110)". 25.

Directional selector switch actuation switch When this switch (25) is turned on, the directional selector switch on the side of the lift arm control lever is actuated. a Position (a): ON The directional selector switch is actuated. The directional selector pilot lamp on the machine monitor lights up. b Position (b): OFF The directional selector switch is turned off. GK038037 WA380-6H – VEAM440100 3-55