3.2 Explanation of components Operation 23. Cooling fan reverse rotation switch This switch (23) is used to rotate the cooling fan in the reverse direction when cleaning the radiator. a Position (a): Manual reverse rotation switch ON If the switch is pressed once when the fan is rotating in the nor- mal direction, the rotation of the fan is reversed. If the switch is pressed again the fan returns to normal rotation. When the fan is rotating in reverse, the cooling fan reverse rotation pilot lamp on the machine monitor lights up. GK038035 For details, see "Clean radiator fins and cooler fins (4-43)". Run the engine at idling when operating the switch.
REMARK When the direction of rotation of the fan switches, the reverse rotation pilot lamp flashes. 23. Cooling fan auto reverse rotation switch (Option) b b This switch (23) is used to rotate the cooling fan in the reverse direction when cleaning the radiator. c Position (a): Auto reverse rotation function ON The fan automatically rotates in reverse for 2 minutes every 2 hours. The pilot lamp inside the switch and the cooling fan reverse rotation pilot lamp on the machine monitor light up. a a a Position (b): Manual reverse rotation switch ON If the switch is pressed once when the fan is rotating in the nor- mal direction, the rotation of the fan is reversed.
If the switch is pressed again, the fan returns to normal rotation. When the fan is rotating in reverse, the cooling fan reverse rotation pilot lamp on the machine monitor lights up. After the switch is pressed, the fan continues to rotate in the reverse direction for approx. 10 minutes. GK038036 GK038036 For details of the procedure for cleaning, see "Clean radiator fins and cooler fins (4-43)". Position (c): Neutral (OFF) The cooling fan is constantly set to normal rotation. Run the engine at idling when operating the switch. 3-54 WA380-6H – VEAM440100