Komatsu — 3.2.2 Switches

Operation 3.2 Explanation of components This switch (21) is used to turn the E.C.S.S. ON and OFF. Position (a): ON The pilot lamp inside the switch lights up and the E.C.S.S. is actuated. Position (b): OFF The E.C.S.S. is not actuated. REMARK The E.C.S.S. is a device that uses the hydraulic spring effect of an accumulator to absorb the vibration of the chassis during travel and allows the machine to travel smoothly and at high speed. When traveling in 1st, the E.C.S.S. is not actuated. When the speed range is 2nd to 4th, and the travel speed becomes more than 5 km/h (3.1 MPH), the E.C.S.S.

is automati- cally actuated; when the travel speed goes below 3 km/h (1.9 MPH), it is automatically disengaged. a b GK038033 22. Emergency steering switch (Option) a This switch (22) is the manual control switch for the emergency steering. Even when the engine has stopped, steering operations are made possible by pressing this switch. Position (a): ON The pilot lamp inside the switch and the emergency steering pilot lamp on the machine monitor light up and it becomes possi- ble to operate the steering. GK038034 When the switch is released, it automatically returns to its origi- nal position. Actuate the emergency steering only in cases of emergency or when checking the function.

The time for operating the emer- gency steering continuously is a maximum of 60 seconds. When using the emergency steering, travel at a speed of less than 5 km/h (3.1 MPH). For details, see "Emergency steering (3-118)". WA380-6H – VEAM440100 3-53