Komatsu — Check air conditioner compressor belt tension, adjust

4.9 Service procedure Maintenance Every 250 hours service Check parking brake 1. Set the machine on a dry downhill slope, press the parking brake switch to the ON position, and check if the parking brake hold the machine in position. 2. If any problem is found, please contact your KOMATSU dis- tributor. Check air conditioner compressor belt tension, adjust Checking The standard deflection between the air conditioner compressor pulley and crank pulley when pressed with a thumb (approx. 98 N) should be approx. 11 to 15 mm. When a belt tension gauge is used, the standard tension is within a range of 353 to 530 N.

GK038111 Check when changing the V-belt The standard deflection between the air conditioner compressor pulley and fan pulley when pressed with a thumb (approx. 98 N) should be approx. 8 to 11.5 mm. When a belt tension gauge is used, the standard tension is within a range of 533 to 745 N. REMARK When the belt has been replaced with a new part, a high tension is necessary, so the initial tension is in the value given above. WA380-6H – VEAM440100 4-61 OF F ON GK038008