Komatsu — Lubricating

4.9 Service procedure Every 1000 hours service Maintenance 11. Refill the specified quantity of oil through oil filler (F). G 12. After filling with oil, check that the oil is at the specified level. For details, see "Check transmission oil level, add oil (4-39)". 13. Check that there is no leakage of oil from the transmission case or oil filter. F GK043099 Clean transmission case breather 1. Loosen bolt (1) and remove cover (3). 2. Remove the mud and dirt from around the breather (2), then remove breather (2). 3 2 After removing the breather, take steps to prevent dirt or dust from entering the mount. 3. Soak the breather (2) in washing liquid and wash it. GK038119 1 Lubricating 1.

Using a grease pump, pump in grease through the grease fittings marked by the arrows. 2. After greasing, wipe off any old grease that was pushed out. 3. Center hinge pin (2 places) 4. Drive shaft center support (1 place) GK043202 4-74 WA380-6H – VEAM440100 GK043201