4.9 Service procedure Every 2000 hours service Maintenance 4.9.11 Every 2000 hours service Maintenance for every 50, 100, 250, 500 and 1000 hours service should be carried out at the same time. Change oil in hydraulic tank, replace hydraulic filter element ! The parts and oil are at high temperature after the engine is stopped, and may cause burns. Wait for the temperature to go down before starting the work. ! When removing the oil filler cap, turn it slowly to release the internal pressure, then remove it. ! Refill capacity: 139 liters 1. Lower the bucket horizontally to the ground and apply the parking brake, then stop the engine. 2. Remove oil filler cap (F). F GK038121 3.
Set a container to catch the oil under drain plug (2). 4. Remove drain plug (2). 5. Loosen drain valve (3), then gradually pull it out to drain the oil. 6. After draining the oil, close drain valve (3), install and tighten drain plug (2). Tightening torque GK038122 2 3 Drain plug (2): 68.6 ± 9.8 Nm Drain valve (3): 63.7 ± 14.7 Nm 4-76 WA380-6H – VEAM440100 WARNING WARNING