2.4 Precautions for maintenance Safety Handling high-pressure hoses ! If oil or fuel leaks from high-pressure hoses, there is danger that it may cause fire or defective operation, which may lead to serious injury or fire. If there are any loose hoses or pip- ing, or any leakage of oil or fuel from the hose or piping mount, stop operation and tighten to the specified torque. ! If any damaged hoses are found, stop operations immedi- ately and contact your KOMATSU distributor. ! Replace all hoses every 2 years at the latest. The shelf life of the hose should not exceed 2 years. ! Hoses must be replaced as soon as the following damage is noticeable:
" damage to the outer layer through to the intermediate layer, " brittleness in the outer layer, " distortions in pressurised or unpressurised state not con- forming with the original shape of the installed hose, " leakages, " damage to the hose fittings or to the connection between fittings and hose, " storage damage. ! When replacing the hoses, always replace the O-rings, gas- kets, and other such parts at the same time. ! See "Periodic replacement of safety critical parts (4-25)".
Precautions for high voltage When the engine is running or immediately after it has stopped, high voltage is generated at the injector terminal and inside the engine controller, so there is danger of electrocution. Never touch the injector terminal or the inside of the engine controller. If it is necessary to touch the injector terminal or the inside of the engine controller, please contact your KOMATSU distributor. 2-40 WA380-6H – VEAM440100 GK043102