John Deere 230LCR, 230LCRD — CHAPTER 5

TM 5-3805-280-10 Operating the Engine STOPPING THE ENGINE IMPORTANT: Prevent possible engine damage. If engine stops when operating under load, remove load. Restart engine immediately. Run 30 seconds at 1/2 speed before adding load. 1. Park machine on a level surface. 2. Lower bucket to the ground. 3. Turn auto-idle switch off. IMPORTANT: Turbocharger may be damaged if engine is not properly shut down. 4. Run engine with engine rpm dial at 1/3 position without load for 2 minutes. 5. Move engine rpm dial to slow idle position. 6. Turn key switch to OFF. Remove key from switch. 7. Pull pilot control shut-off lever to locked position. TX,25,DH5505 –19–29MAY96–1/1 5-11