TM 5-3805-280-10 Operating the Machine H/P (HIGH POWER) MODE NOTE: With both the H/P and E modes turned on, the digging power increases while achieving low fuel consumption. Use H/P mode when extra horse power is needed for rolling in the arm in excavation work. The H/P mode is effective when the dig mode is selected as the work mode. H/P mode can also be used with the E mode turned on. T101630 –UN–01JUL96 The H/P mode will be activated, automatically increasing the engine speed when: H/P mode switch (A) is pushed down. Engine speed is set to 1600 rpm or higher. Arm roll-in is operated. A load heavier than a specified amount is applied. T107694 –UN–27FEB97 Push down H/P mode switch (A).
The switch will stay down and H/P mode indicator will light. Push the H/P mode switch again. The switch will return to original position and will deactivate the H/P mode. TX,35,DH5408 –19–27FEB97–1/1 STANDARD MODE The engine is in standard mode when no switches are pushed down and no indicator lights are on. TX,35,DH5135 –19–03AUG96–1/1 7-10